Last summer, I was in between projects and having a sort of “A-ha” moment connecting between my early experience making things and the path that lead me back to making things. I starting thinking about all the things that I made as child and the contrast of being a kid making things with a very limited set of tools, experience, and knowledge as opposed the challenge of making things now having perhaps too much of one or another. It was at this point that decided to start a little side project. A project that may or not be anything except perhaps an exercise in mining the memory.
Saturday, February 26, 2011
Friday, February 18, 2011
Thursday, February 17, 2011
Monday, February 14, 2011
When I decided to start using handplanes, I was somewhat at a loss as where to start. I had very little experience using planes and,in hindsight, the experience I had was probably more of an obstacle. As I planned my first purchase, I had to decide whether to buy a new plane or fix up on old plane. I ended up buying an old plane: an old Stanley Bedrock Style 605 from the 1920’s off of E-bay for about 90 dollars. The plane was in rough shape, but all the parts were there and nothing was damaged. Using Garrett Hack’s Handplane Book and some tutorials from online, I set about restoring the plane. The first step was to take the plane apart and figure out try to figure out how it did it- I would later have to figure out how well each part was doing what it was doing.
Thursday, February 10, 2011
This week I cut a set of mortise and tenon joints for the base of a display case. I decided that I would try out the new mortising chisels I got last month and some sweet new sawing skills that I have been working on. After carefully cutting and fitting the parts, I started thinking about how all of the time and effort put into these joints would be hidden from view the moment that I placed glue into the joint and clamped up all of the parts. I also considered about the myriad other ways in which this joint could be constructed(i.e. dowels, dominos, screws, biscuits, etc.) or handful of less manual techniques that could be employed to the form the parts (i.e. mortising machine, a router jig, table saw, drill press and on and on and on…)
The question is why bother this sort of thing by hand?